1. Name of substance / preparation
Trade name
CHEMROAD
Use of substance / preparation Soil additives. Soil stabilization agent, Soil solicification,Soil amendment, Soil crusting agent …………………………………………………………………………………………….............
2. Composition / data regarding components
Chemical characterization (preparation) Watery styrene-butadiene-polymer dispersion The composition is a trade secret.Contains no other component or impurities which will Influence the classification of the product. …………………………………………………………………………………………………….
3. Possible dangers
No dangerous preparation. Maintain air contaminant concentrations in the workplace at the Lowest feasible leveis. Minor component will migrate into the container headspace. Open drums in well ventilated space. …………………………………………………………………………………………………….
4. First-aid measures
General remarks Remove contaminated clothing and shoes immediately. Consult doctor when you feel sick. No special measures required. After breathing in Move patient to fresh air. If breathing has stopped or is labored give assisted respiration (e.g. mouth-to-mouth). Supplemental oxygen may be indicated.Seek medical advice. After skin contact Wash affected area with soap water. After eye contact Rinse carefully with plenty of water also beneath….. After awallowing Consult doctor to find out whether should vomit or not Vomiting should not be induced. Immediately consult doctor.
…………………………………………………………………………………………………….
5. Measures to be taken for fire fighting
Suitable means of tire extinction “The product itself does not bure ; adapt fire fighting measures to existing fire” Foam,carbon dioxide (CO2), dry fire extinction agent,water jet Avoid unsuitable fire extinction agent for safety reasons Full water jet Special danger caused by the substance or the preparation as such , by its combustion Products or generated gases. The following substances can be generated in case of fire: Carbon monoxide (CO), carbon dioxide(CO2) and smoke. Special protective equipment for fire fighting Protective clothing Use breathing apparatus which is independent from circulating air. Additional remarks Cool threatened containers with jet. …………………………………………………………………………………………………….
6. Measures to be taken in the case of unintended exposure
Person-related precautionary measures Avoid contact with skin. Eyes and clothes. Ensure sufficient ventilation. Use personal protective clothing. Environmental protection measures Clean dirty surfaces thoroughly. Avoid penetration into the sewerage system / surface water / ground water. Cleaning process Absorb with liquid absorbing material (e.g. send, silica gel, acid bonding agent, universal Bonding agent) Remove with a shovel and fill into suitable containers for disposal. …………………………………………………………………………………………………….
7. Handing and strorage
Remarks regarding safe handling Ensure good ventilation and outlet at the working place. Only use in well-ventilated areas Avoid contact with skin,eyes and clothes.Avoid breathing vapors. Remarks regarding fire fighting and danger of explosion No special fire fighting measures required.
Requirements regarding storage containers Store in original containers at ambient temperature Remarks regarding joint storage Incompatible with oxidizing agents Further remarks regarding storage conditions Keep away from food,drinks and feedstuff. Storage class (VCI) :12
…………………………………………………………………………………………………….
8. Limit of exposure and personal protective equipment
Limit values of exposure Limiting and controlling exposure Limiting and controlling exposure at the working place Ensure sufficient aeration, in particular, in closed rooms. Protection and hygienic measures Wash hands prior to breaks and after finishing work. Do not eat , drink or smork while using this product. Remove immediately dirty or soaked clothes. Avoid contact with skin, eyes and clothes. Breathing apparatus “not required,except for the formation of aerosol” Hand Protection Rubber Gloves. The breakthrough time of the selected gloves(s) must be greater than the Intended use period. Different specific requirements can result depending on the use. Therefore please ensure also the observance of the protective gloves suppliers. Eye protection Eye rinsing bottle with clean water Chemical safety glasses. Body protection Long-sleeved working clothes.
…………………………………………………………………………………………………….
9. Physical and Chemical properties
Aggregate condition : white mobile liquid, mild odour.
- Important data regarding health and environment protection as well as safety
Test standard PH-value approx.9-12 Chandes regarding condition Boiling point ~ 100 C Density: 1- 1.02 g/ml Solubility in water : can be mixed g/l
…………………………………………………………………………………………………….
10. Stability and reactivity
Please avoid Overheating to prevent thermal decomposition Please do not use the following substances Strong oxidizing agents Further remarks No decomposition when stored and used according to instructions.
…………………………………………………………………………………………………….
11. Remarks regarding toxicology
Irritating / corroding effect Not irritating General remarks Adverse health effects are not know and are not to be expected when the product is handled and used according to instructions.
…………………………………………………………………………………………………….
12. Remarks regarding ecology
Further remarks Slightly dangerous for water Avoid penetration into surface water and sewerage system.
…………………………………………………………………………………………………….
13. Remarks regarding disposal
Recommendation Recycling should be given preference,large quantities should be avoided. For small quantities (less than 100 gallons) : Disposal to municipal or wastewater Treatment plants is normally acceptable.Obtain approval from authorities before disposal The product does impart a white, milky colour to water, which may not be removed or sufficiently diluted by the treatment facility. The product may also cause foaming when agitated. The product can be chemically or biologically degraded. Disposal of non-cleaned packaging and recommended detergents Take empty containers to the local recycling,recovery or waste disposal company. Contaminated packaging is to be emptied completely and after thorough cleaning it can be reused. Packaging that cannot be cleaned is to be disposed off in the same way as the substance concemed. …………………………………………………………………………………………………….
14. Remarks regarding transport
- Transport by road, train
- Transport by inland navigation companies
- Transport seaborne shipping traffic
- Transport by airfreight forwarders
- Other relevant remarks
No hazardous goods within the meaning of the transport regulations.
…………………………………………………………………………………………………….
15. Regulations
Marking No marking required.
Not subject to the decree for accidents Danger class regarding water : 1- slightly dangerous for water
…………………………………………………………………………………………………….
16. Miscellaneous remarks
Further remarks Some of the remarks in the positions from 4 to 8 and from 10 to 12 do not refer to the used and the proper application of the product (see information regarding use / product) but to the release of larger quantities of the product during accidents or situations. These remarks exclusively describe the safety requirements of the product / the products. and they are based on our current knowledge.
|