real estate menu left
real estate menu right

 

1. Name of substance / preparation

Trade name

CHEMROAD

Use of substance / preparation
Soil additives. Soil stabilization agent, Soil solicification,Soil amendment, Soil crusting agent
…………………………………………………………………………………………….............

2. Composition / data regarding components

Chemical characterization (preparation)
Watery styrene-butadiene-polymer dispersion
The composition is a trade secret.Contains no other component or impurities which will Influence the classification of the product.
…………………………………………………………………………………………………….

3. Possible dangers

No dangerous preparation. Maintain air contaminant concentrations in the workplace at the Lowest feasible leveis. Minor component will migrate into the container headspace. Open drums in well ventilated space.
…………………………………………………………………………………………………….

4. First-aid measures

General remarks
Remove contaminated clothing and shoes immediately.
Consult doctor when you feel sick.
No special measures required.
After breathing in
Move patient to fresh air. If breathing has stopped or is labored give assisted respiration
(e.g. mouth-to-mouth). Supplemental oxygen may be indicated.Seek medical advice.
After skin contact
Wash affected area with soap water.
After eye contact
Rinse carefully with plenty of water also beneath…..
After awallowing
Consult doctor to find out whether should vomit or not
Vomiting should not be induced.
Immediately consult doctor.

…………………………………………………………………………………………………….

5. Measures to be taken for fire fighting

Suitable means of tire extinction
“The product itself does not bure ; adapt fire fighting measures to existing fire”
Foam,carbon dioxide (CO2), dry fire extinction agent,water jet
Avoid unsuitable fire extinction agent for safety reasons
Full water jet
Special danger caused by the substance or the preparation as such , by its combustion
Products or generated gases.
The following substances can be generated in case of fire:
Carbon monoxide (CO), carbon dioxide(CO2) and smoke.
Special protective equipment for fire fighting
Protective clothing
Use breathing apparatus which is independent from circulating air.
Additional remarks
Cool threatened containers with jet.
…………………………………………………………………………………………………….

6. Measures to be taken in the case of unintended exposure

Person-related precautionary measures
Avoid contact with skin. Eyes and clothes.
Ensure sufficient ventilation.
Use personal protective clothing.
Environmental protection measures
Clean dirty surfaces thoroughly.
Avoid penetration into the sewerage system / surface water / ground water.
Cleaning process
Absorb with liquid absorbing material (e.g. send, silica gel, acid bonding agent, universal Bonding agent)
Remove with a shovel and fill into suitable containers for disposal.
…………………………………………………………………………………………………….

7. Handing and strorage

  • Handing

Remarks regarding safe handling
Ensure good ventilation and outlet at the working place.
Only use in well-ventilated areas
Avoid contact with skin,eyes and clothes.Avoid breathing vapors.
Remarks regarding fire fighting and danger of explosion
No special fire fighting measures required.

  • storage

Requirements regarding storage containers
Store in original containers at ambient temperature
Remarks regarding joint storage
Incompatible with oxidizing agents
Further remarks regarding storage conditions
Keep away from food,drinks and feedstuff.
Storage class (VCI) :12

…………………………………………………………………………………………………….

8. Limit of exposure and personal protective equipment

Limit values of exposure
Limiting and controlling exposure
Limiting and controlling exposure at the working place
Ensure sufficient aeration, in particular, in closed rooms.
Protection and hygienic measures
Wash hands prior to breaks and after finishing work.
Do not eat , drink or smork while using this product.
Remove immediately dirty or soaked clothes.
Avoid contact with skin, eyes and clothes.
Breathing apparatus
“not required,except for the formation of aerosol”
Hand Protection
Rubber Gloves. The breakthrough time of the selected gloves(s) must be greater than the Intended use period.
Different specific requirements can result depending on the use. Therefore please ensure also the observance of the protective gloves suppliers.
Eye protection
Eye rinsing bottle with clean water
Chemical safety glasses.
Body protection
Long-sleeved working clothes.

…………………………………………………………………………………………………….

9. Physical and Chemical properties

  • Appearance

Aggregate condition : white mobile liquid, mild odour.

  • Important data regarding health and environment protection as well as safety

Test standard
PH-value approx.9-12
Chandes regarding condition
Boiling point ~ 100 C
Density: 1- 1.02 g/ml
Solubility in water : can be mixed g/l

…………………………………………………………………………………………………….

10. Stability and reactivity

Please avoid
Overheating to prevent thermal decomposition
Please do not use the following substances
Strong oxidizing agents
Further remarks
No decomposition when stored and used according to instructions.

…………………………………………………………………………………………………….

11. Remarks regarding toxicology

Irritating / corroding effect
Not irritating
General remarks
Adverse health effects are not know and are not to be expected when the product is handled and used according to instructions.

…………………………………………………………………………………………………….

12. Remarks regarding ecology

Further remarks
Slightly dangerous for water
Avoid penetration into surface water and sewerage system.

…………………………………………………………………………………………………….

13. Remarks regarding disposal

Recommendation
Recycling should be given preference,large quantities should be avoided.
For small quantities (less than 100 gallons) : Disposal to municipal or wastewater
Treatment plants is normally acceptable.Obtain approval from authorities before disposal
The product does impart a white, milky colour to water, which may not be removed or sufficiently diluted by the treatment facility. The product may also cause foaming when agitated. The product can be chemically or biologically degraded.
Disposal of non-cleaned packaging and recommended detergents
Take empty containers to the local recycling,recovery or waste disposal company.
Contaminated packaging is to be emptied completely and after thorough cleaning it can be reused.
Packaging that cannot be cleaned is to be disposed off in the same way as the substance concemed.
…………………………………………………………………………………………………….

14. Remarks regarding transport

  • Transport by road, train
  • Transport by inland navigation companies
  • Transport seaborne shipping traffic
  • Transport by airfreight forwarders
  • Other relevant remarks

No hazardous goods within the meaning of the transport regulations.

…………………………………………………………………………………………………….

15. Regulations

  • Marking

Marking
No marking required.

  • National regulations

Not subject to the decree for accidents
Danger class regarding water : 1- slightly dangerous for water

…………………………………………………………………………………………………….

16. Miscellaneous remarks

Further remarks
Some of the remarks in the positions from 4 to 8 and from 10 to 12 do not refer to the used and the proper application of the product (see information regarding use / product) but to the release of larger quantities of the product during accidents or situations.
These remarks exclusively describe the safety requirements of the product / the products. and they are based on our current knowledge.

 

 



Copyright © 2009-2024 All Rights Reserved Chemroad.com
J Smith Holding Co.,Ltd. 301/344 Prachachuen 12 Yak 1-2-35 Thongsonghong Laksi, Bangkok 10210 Thailand
Tel. 02-589-9586, (66)81-633-2992, (66)86-633-2992